itel Energy 1.5kw (1500W) Inverter Hybrid 12V IP54 1Phase IPV-1K512U 1.5kva

itel Energy 1.5kW / 1.8kVA Hybrid Inverter — IPV-1K512U

The itel Energy IPV-1K512U is a 12V off-grid hybrid solar inverter designed for small residential, office, cabin, RV and backup-power applications. It provides 1.5kW (1,500W) pure sine-wave AC output and is listed by itel as a 1.8kVA inverter—not 1.5kVA.

Key Specifications

The manufacturer/distributor information confirms the 650W MPPT solar input, 45A charging capability, pure-sine output, IP54 protection and lithium/lead-acid compatibility.

What Does 1.5kW / 1.8kVA Mean?

1.5kW is the inverter’s real power rating—the approximate maximum continuous useful load.

1.8kVA is its apparent-power rating, which accounts for both real power and reactive power in AC equipment.

So the product is more accurately described as:

itel IPV-1K512U — 1.5kW / 1.8kVA / 12V Hybrid Inverter

rather than 1.5kVA.

What Can It Power?

A practical load combination could include:

*Refrigerators have a higher starting surge, so the actual suitability depends on the refrigerator and the inverter’s surge behavior.

The inverter has considerably more capacity than a 500W power station, but it is still important to keep the continuous load within its 1,500W output rating.

Solar Charging

The IPV-1K512U has an integrated MPPT solar charge controller and supports up to 650W of solar input according to the listed product specifications. This allows solar panels to recharge the connected battery while also supplying loads.

Important: It Is Not an All-in-One Power Station

Unlike the itel Energy Power Tank or Power Go Pro, this inverter does not contain the battery. You need a compatible external 12V battery and appropriate solar panels to build a complete system. The product listing specifically notes that a solar battery and charging source are required.

For example:

Solar Panels → IPV-1K512U → 12V Battery → Home Appliances

IP54 Protection

The IP54 rating provides protection against dust ingress and water splashes. It is therefore more resistant to environmental conditions than a basic indoor-only inverter, but it should still be installed in a dry, properly ventilated location rather than exposed directly to rain.